Guide

Buying an RV: The Inspection Checklist Beyond the Test Drive

An RV is a house bolted to a vehicle, and the house half fails more expensively. What to inspect for water damage, appliances, chassis, and paperwork before buying.

By Motorscrape TeamLast reviewed

Buyers inspect an RV like a vehicle: engine, tires, test drive. That covers the cheaper half of the problems. The expensive failures in RV ownership come from the house side — water intrusion, dead appliances, delaminated walls — and most of them are visible before purchase if you know where to look and insist on seeing systems actually run.

Water damage is the first inspection

Water is the RV killer. Inside, press on walls and ceilings around windows, vents, and the cab-over area if fitted; softness, staining, bubbling, or a musty smell means intrusion, and rot follows it. Outside, look for wavy or bubbled sidewall panels (delamination), cracked or shrunken sealant around every seam, and damaged roof membrane. Budget for a professional inspection on any sizeable purchase: inspectors use moisture meters and know the model-specific weak points, and their fee is small next to a roof or wall repair.

Make every system work in front of you

Do not accept "it worked last season." Ask to see:

  • Plumbing pressurised with the pump and on city water, taps run, toilet flushing, and no leaks under sinks or around the water heater. Check the dump valves operate.
  • Electrical on shore power and on battery: lights, outlets, converter or inverter behaviour, and the generator starting under load if fitted.
  • Appliances: refrigerator cooling on both gas and electric, furnace and air conditioning cycling, water heater igniting, stove and oven lighting.
  • Slide-outs and levelers fully extended and retracted, watching for hesitation, uneven movement, or torn seals.
  • Awnings fully out and back in.

A seller who cannot demonstrate a system working should price the RV as if that system needs repair.

The vehicle underneath

For motorhomes, check the chassis like a truck: tire dates as well as tread (RV tires age out before they wear out), brake feel, fluid leaks, exhaust condition, and rust on frame and storage compartments. Confirm the weight ratings: the gross vehicle weight rating, the cargo carrying capacity on the certification label, and whether your intended use — full tanks, passengers, gear — keeps you legal and safe. For trailers, inspect the coupler, safety chains, breakaway switch, wheel bearings, and frame, and confirm your tow vehicle's ratings cover the loaded trailer, not its empty weight.

Paperwork and history

Match VINs on the chassis and title, check for liens, and ask for service and appliance manuals and maintenance records. Confirm title brand: salvage or rebuilt history affects insurance and resale. For motorhomes, a vehicle history report covers only the chassis half, which is another reason the physical inspection carries so much weight.

New versus used, dealer versus private

Dealers can demonstrate systems on a prepared unit, may include a limited warranty, and handle title work; private sellers are often cheaper but sell as-seen. Either way, compare several units. Our RV dealer directory lists stores by brand and state so you can see the same floorplan at more than one seller before committing.

Budget honestly

Beyond the purchase price, plan for tires if they are aged, roof resealing, batteries, insurance, storage, and the first service. RVs that sit need maintenance as surely as RVs that travel.

Bottom line

Inspect for water first, run every system, verify weights and paperwork, and pay for a professional inspection on any major purchase. An RV bought on evidence gives you seasons of travel; one bought on optimism gives you a project.